|
|
Post by Lenny on Nov 14, 2018 9:04:41 GMT -5
Does anyone use any type of oil / lubricant on their vintage sled clutches to help reduce wear or to make em work proper again?
If So what type? thanks Lenny |
|
|
|
Post by jiggyjoe on Nov 14, 2018 9:12:06 GMT -5
hi Lenny that Clutch looks like its off a old Yammy sled anyways..
I would just clean it up and oil it lightly the splines where the clutch moves in and outshould be rust free,,,
Wouldnt go over board on the lube,, Some people use a dry spray on the clutch...
also where the belt rides on the bearing on some old sleds make sure the bearing spins freely..
other than that scotch pads to clean the two halves the disks inside where the belt gets squeezed
is probly more important ...
|
|
|
|
Post by sledrat on Nov 14, 2018 11:05:16 GMT -5
X2 on what jiffy said above has sorry JIGGY HA!
what jiggy Said but also theirs a spray can product called
Slip plate for belt type clutch systems
pretty sure most farm implement stores carry it..
7-10 bucks a can in Canada..
something to look into ..
|
|
