Post by sledrat on Mar 25, 2014 9:57:59 GMT -5
Heres the way i removed the back plate off a Rotax 399 motor lol
I used my REESE TRUCK HITCH ADAPTER..
***REMEMBER THIS THOUGH --->
THE CLUTCH HAS TO BE THE TYPE OF CLUTCH THAT UNSCREWs /SPINS OFF COUNTER CLOCKWISE !!!
general a clutch that spins off will have a hole Straight at the end of the clutch..
ALSO if you know what other clutches and year of model engines this method
will work on post it below...
340s rotax twins some single cylinders i think not sure of all the models..
Hope this helps some folkz out
