|
Post by Dale on Nov 2, 2014 23:10:37 GMT -5
Hello board i have question i do have a older elan skidoo and it was put away in storage/the barn a few years back.. So to make a long story short i recently decided to try and get the old elan out for this snowmobile season,, So i tried pulling it out to the middle of the barn with my tractor so i could get at it to tune it up.. But i put the throttle to it on the tractor and bent / near ripped the ski right off! So i was wondering anyone ever fix a ski that has been a bit bent up ? or do i just need another whole new ski? The Skis were not in great shape to start with.. thanks
|
|
|
Post by thebushman on Nov 3, 2014 8:55:04 GMT -5
I would try taking it off the sled and hammering it out if it has bends and dips in it. If you have a 2x4 lay the skis edge on it you will see where you need to hammer/straighten it flat to the board..
|
|