|
Post by Yammy250 on Oct 6, 2015 9:21:27 GMT -5
Hi board i have bit of a problem with my old Yamaha Enticer 250! Ok i tried starting it the other day to get it ready for this upcoming sled season! When i did this i primed the carb like normal with spray bottle and i then pulled the choke. It started and ran for a min then it completely died! I pulled and pulled this lil bugger over and over no luck! So i tryed checking it for spark its a single cylinder sled no Spark! Anyideas why? THIS LIL 250 NEEDS HELP! It doesnt look like this one anymore! ha ha ha ha Same thing though..
|
|
|
Post by Sledwrench on Oct 10, 2015 3:13:07 GMT -5
Check the plug and all switches first I would then unplug wiring harness try for spark again If not or if u have a spare coil trry that the. Move on to the cdi box
|
|
|
Post by Yammy250 on Oct 16, 2015 8:03:10 GMT -5
I did what u said sled it was a bad plug ha! I way over looked and thought. that one!!! ' thanks man for the reffresh Sometime u have to keep it simple! The Yammy250 is running like a champ! And it still lifts the skis!!!
|
|